TSM-EN-MAXI1-FI

"A  drawing  of  a  polyline "        /    "To draw a polyline "
"Start  the  PLINE  command ." 
"The  operating  Windows  system " 
"Choose  the  Polyline  option  from  the  Polyline  flyout  on  the  Draw  toolbar ." 
"The  operating  DOS and Unix  system " 
"Choose  the  Polyline  option  from  the  Draw  menu." 
"Specify  the  first  segment  of  the  polyline ." 
"Specify  the  first  point  of  the  first  segment  of  the  polyline , and  specify  the  end  point  of  the  first  segment  of  the  polyline ." 
"Repeat  these  steps , in order  to  specify  the  second  segment  of  the  polyline ." 
"End  the  polyline ." 
"Press  the  Return  key ." 


TSM-EN-MAXI1-SI

"A  drawing  of  the  polyline "  /    "To draw the polyline "
"The  operating  Windows  system " 
"Choose  the  Polyline  option  from  the  Polyline  flyout  on  the  Draw  toolbar ." 
"The  operating  DOS and Unix  system " 
"Choose  the  Polyline  option  from  the  Draw  menu." 
"Specify  the  first  point  of  the  first  segment  of  the  polyline ." 
"Specify  the  end  point  of  the  first  segment  of  the  polyline ." 
"Repeat  these  steps ." 
"Press  the  Return  key ." 
"Press  the  c  key ." 

TSM-EN-MAXI1234-FO

"Functions of keys " 
"A  pressing  of  the  c  key  closes  a  polyline ." 
"A  pressing  of  the  Return  key  ends  the  polyline ." 

TSM-EN-MAXI1234-OO

"Functions of buttons " 
"The  Add  button  adds  the  style  of  the  multiline  to  the  drawing ." 
"The  Multiline Properties  button  specifies  the  properties  of  the  multiline." 
"The  Save  button  closes  the  dialogue  Save  box ." 
"Menu options " 
"The  Save  option  saves  the  drawing ." 
"The  Display joints  option  displays  the  vertices  of  the  multiline." 
"The  ON  option  displays  the  colour  of  the  background ." 
"The  Endp  command line  specifies  a  start  point  of  an  arc ." 
"The  Poi  command line  specifies  the  second  point  of  the  arc ." 

TSM-EN-MAXI1234-OVIEW

"An  Overview " 
"The  program  draws  a  polyline  from  a  line  and  an  arc , and  you  may  draw  a  segment  of  a  line , and  you  may  draw  an  arc ." 
"Further, the  program  defines  a  style  of  a  multiline  in  a  drawing ." 
"Further, the  program  adds  the  style  of  the  multiline  to  the  drawing ." 
"Further, the  program  saves  a  drawing , and  you  may  save  the  style  of  the  multiline  into  a  file ." 


TSM-EN-MAXI2-FI

"A  drawing  of  a  polyline  from  a  line  and  an  arc " / "To draw a polyline  from  a  line  and  an  arc "
"Start  the  PLINE  command ." 
"The  operating  Windows  system " 
"Choose  the  Polyline  option  from  the  Polyline  menu  on  the  Draw  toolbar ." 
"The  operating  DOS and Unix  system " 
"Choose  the  Polyline  option  from  the  Draw  menu." 
"Draw  a  segment  of  a  line ." 
"Specify  the  start  point  of  the  segment  of  a  line , and  specify  the  end  point  of  the  segment  of  the  line ." 
"Draw  an  arc ." 
"Switch  into  the  Arc  mode." 
"Enter  the  a  command line ." 
"The  dialogue  Arc mode confirmation  box  appears ." 
"Click  the  OK  button  in  the  dialogue  Arc mode confirmation  box ." 
"The  dialogue  Arc mode confirmation  box  disappears ." 
"Specify  the  second  point  of  the  arc , and  specify  the  end  point  of  the  arc ." 
"Draw  a  segment  of  a  line ." 
"Switch  into  the  Line  mode." 
"Enter  the  l  command line ." 
"The  dialogue  Line mode confirmation  box  appears ." 
"Click  the  OK  button  in  the  dialogue  Line mode confirmation  box ." 
"The  dialogue  Line mode confirmation  box  disappears ." 
"Enter  the  distance  from  the  end  point  of  the  arc , and  enter  an  angle  from  the  end  point  of  the  arc ." 
"Press  the  Return  key , in order  to  end  the  polyline  from  a  line  and  an  arc ." 

TSM-EN-MAXI2-SI

"A  drawing  of  the  polyline  from  a  line  and  an  arc " / "To draw the polyline  from  a  line  and  an  arc "
"The  operating  Windows  system " 
"Choose  the  Polyline  option  from  the  Polyline  menu  on  the  Draw  toolbar ." 
"The  operating  DOS and Unix  system " 
"Choose  the  Polyline  option  from  the  Draw  menu." 
"Specify  the  start  point  of  the  segment  of  a  line ." 
"Specify  the  end  point  of  the  segment  of  a  line ." 
"Enter  the  a  command line ." 
"Click  the  OK  button  in  the  dialogue  Arc mode confirmation  box ." 
"Specify  the  second  point  of  the  arc ." 
"Specify  the  end  point  of  the  arc ." 
"Enter  the  l  command line ." 
"Click  the  OK  button  in  the  dialogue  Line mode confirmation  box ." 
"Enter  the  distance  from  the  end  point  of  the  arc ." 
"Enter  the  angle  from  the  end  point  of  the  arc ." 
"Press  the  Return  key ." 


TSM-EN-MAXI3-FI

"A  drawing  of  an  arc "     /  "To  draw  an  arc " 
"Start  the  Arc  command ." 
"The  operating  Windows  system " 
"Choose  the  3 points  option  from  the  Arc  flyout  on  the  Draw  toolbar ." 
"The  operating  DOS and Unix  system " 
"Choose  the  Arc  option  from  the  Draw  menu, and  choose  the  3 points  option ." 
"Specify  the  arc  's  start  point ." 
"Enter  the  Endp  command line ." 
"Choose  a  line ." 
"The  arc  is  snapped  to  the  line  's  end  point ." 
"Specify  the  arc  's  second  point ." 
"Enter  the  Poi  command line ." 
"Specify  a  point ." 
"The  arc  is  snapped  to  the  point ." 
"Specify  the  arc  's  end  point ." 
"Press  the  Return  key , in order  to  end  the  arc ." 
"Save  a  drawing ." 
"Choose  the  Save  option  from  the  Save  menu." 
"The  dialogue  Save  box  appears ." 
"Enter  the  drawing  's  name  in  the  Name  field ." 
"Enter  a  description  in  the  Description  field ." 
"Click  the  Save  button , in order  to  close  the  dialogue  Save  box ." 
"The  dialogue  Save  box  disappears ." 


TSM-EN-MAXI3-SI

"A  drawing  of  the  arc "   /  "To  draw  the  arc " 
"The  operating  Windows  system " 
"Choose  the  3 points  option  from  the  Arc  menu  at  the  Draw  toolbar ." 
"The  operating  DOS and Unix  system " 
"Choose  the  Arc  option  from  the  Draw  menu." 
"Choose  the  3 points  option ." 
"Enter  the  Endp  command line ." 
"Choose  the  line ." 
"Enter  the  Poi  command line ." 
"Specify  the  point ." 
"Specify  the  arc  's  end  point ." 
"Press  the  Return  key ." 
"Choose  the  Save  option  from  the  Save  menu." 
"Enter  the  drawing  's  name  in  the  Name  field ." 
"Enter  the  description  in  the  Description  field ." 
"Click  the  Save  button ." 


TSM-EN-MAXI4-FI

"A drawing of an arc."    /  "To  draw  an  arc " 
"Start  the  Arc  command ." 
"The  operating  Windows  system " 
"Choose  the  3 points  option  from  the  Arc  flyout  on  the  Draw  toolbar ." 
"The  operating  DOS and Unix  system " 
"Choose  the  Arc  option  from  the  Draw  menu, and  choose  the  3 points  option ." 
"Specify  the  arc  's  start  point ." 
"Enter  the  Endp  command line ." 
"Choose  a  line ." 
"The  arc  is  snaped  to  the  line  's  end  point ." 
"Specify  the  arc  's  second  point ." 
"Enter  the  Poi  command line ." 
"Specify  a  point ." 
"The  arc  is  snaped  to  the  point ." 
"Specify  the  arc  's  end  point ." 
"Press  the  Return  key , in order  to  end  the  arc ." 
"Save  a  drawing ." 
"Choose  the  Save  option  from  the  Save  menu." 
"The  dialogue  Save  box  appears ." 
"Enter  the  drawing  's  name  in  the  Name  field ." 
"Enter  a  description  in  the  Description  field ." 
"Click  the  Save  button , in order  to  close  the  dialogue  Save  box ." 
"The  dialogue  Save  box  disappears ." 

TSM-EN-MAXI4-SI

"A  drawing  of  the  arc "     /  "To  draw  the  arc " 
"The  operating  Windows  system " 
"Choose  the  3 points  option  from  the  Arc  flyout  on  the  Draw  toolbar ." 
"The  operating  DOS and Unix  system " 
"Choose  the  Arc  option  from  the  Draw  menu." 
"Choose  the  3 points  option ." 
"Enter  the  Endp  command line ." 
"Choose  the  line ." 
"Enter  the  Poi  command line ." 
"Specify  the  point ." 
"Specify  the  arc  's  end  point ." 
"Press  the  Return  key ." 
"Choose  the  Save  option  from  the  Save  menu." 
"Enter  the  drawing  's  name  in  the  Name  field ." 
"Enter  the  description  in  the  Description  field ." 
"Click  the  Save  button ."